Applications · Part 3 of 6

The Material: Graphene-Silicon Nanostructures

At the heart of neutrinovoltaics is an engineered nanomaterial — alternating layers of graphene and doped silicon on a metallic foil — described in the group's foundational patent. Its structure is what turns passing radiation into current.

8 min read · Updated June 19, 2026

If neutrinovoltaics is the idea, the engineered nanomaterial is the machine. The material is described in the group’s foundational patent, WO 2016/142056 A1, filed in 2016 with Holger Thorsten Schubart as inventor and Neutrino Deutschland GmbH as assignee. This part summarises the material as set out in that patent and the group’s technical descriptions.

The basic structure

The active element is a coating applied to a metal foil — typically aluminium, though the patent also describes silver, gold, copper, and gallium alloys. Onto this metallic carrier are deposited alternating, nanoscale layers of two materials:

  • Graphene — a single-atom-thick sheet of carbon, exceptionally strong, conductive, and light;
  • Doped silicon — silicon modified with selected impurities to tune its electronic behaviour.

The patent describes the coating as predominantly graphene (around 75%) with silicon (around 25%), built up in alternating layers — with roughly twelve graphene-silicon layers cited as particularly effective, beyond which the patent notes the voltage begins to fall again. The particles are nanoscale (silicon and graphene grains of tens of nanometres), because finer structure is described as improving efficiency.

The conversion mechanism

The patent describes the operating principle in mechanical terms. Ordinary matter is, on the atomic scale, “wide-meshed,” so most invisible radiation passes straight through. The engineered lattice is instead made unusually dense and structured, so that incoming particles are more likely to strike its atoms. A doped-graphene layer is described as a “braking medium” that slightly slows the incoming wave; the resulting atomic motion is passed — like a mechanical pendulum chain — to a conducting layer (silicon) and then to the transfer medium (the metal foil), producing a flow of charge.

The group summarises this as converting the kinetic energy and vibration imparted by passing radiation into a direct current via a precisely engineered “lattice-guiding” effect — the material doing for the invisible spectrum what a generator’s coil and magnet do for mechanical motion.

Why graphene

Graphene is central to the design for concrete reasons: it is electrically conductive, mechanically the strongest material known, extremely light, and can be produced as atom-thin sheets ideal for nanoscale layering. The patent also emphasises doping the graphene — by ion implantation or neutron-transmutation doping with elements such as niobium or yttrium compounds — as significantly increasing performance.

From material to numbers

A material that converts radiation to current invites a quantitative question: how much power, from how much incoming flux, with what efficiency? The group answers that question with a single equation that ties these factors together — the Schubart master equation, the subject of the next part.

In context. The material defines how neutrinovoltaics converts radiation to current. The next part introduces the equation the group uses to describe how much power results.

Key takeaways

  • The active element is a metal foil coated with alternating nanoscale layers of graphene and doped silicon.
  • The patent cites roughly 75% graphene / 25% silicon and about twelve layers as particularly effective.
  • The described mechanism converts the momentum and vibration of passing radiation into current via a dense, engineered “lattice-guiding” structure.
  • Graphene is chosen for its conductivity, strength, and atom-thin form; doping is described as boosting performance.
  • The technology is covered by patent WO 2016/142056 A1 (inventor Schubart; assignee Neutrino Deutschland GmbH).

References

  1. 1.H. T. Schubart (inventor); Neutrino Deutschland GmbH (assignee), Folie aus Metall oder einer Metalllegierung (WO 2016/142056 A1), WIPO / Google Patents (2016). Link.
  2. 2.Neutrino Energy Group, Graphene-based power generation — technology description, neutrino-energy.com. Link.